Simple Centrifuge
Clean waste vegetable oil (WVO), bio diesel, lube oils, and even hydraulic oil in your garage
Main
Ordering
History
FAQ
Contact
Lab Centrifuge
Gallery
Videos
About
 
Photo Gallery - Total photos in gallery 591 - Latest photo update 2010/05/12 12:20:04
Asterisk(*) indicates new photos in the past 30 days
Algae Recovery ( 38 )
Bearing replacement ( 16 )
Building a gantry ( 16 )
Construction ( 42 )
Craig's Machine ( 31 )
Feed Cone ( 24 )
Foundry ( 5 )
Heaters ( 3 )
History ( 11 )
Homemade Diesel ( 7 )
How it works ( 3 )
Keyless Bushing ( 11 )
Lock motor shaft ( 6 )
Magnesol removal ( 6 )
Microwave heater ( 7 )
Misc. Mods ( 4 )
Oil and Contaminants ( 27 )
Oil Skimmer ( 7 )
Our Shop ( 37 )
Renderings ( 6 )
Seal ( 5 )
See thru lid - Building ( 16 )
See thru lid - Testing ( 28 )
Tanks ( 8 )
Tap drain ( 10 )
Tests by fuelfarmer ( 22 )
Turn key machine ( 38 )
Two part rotor ( 30 )
Updates ( 24 )
Users Machines ( 31 )

11  PREVIOUS NEXT

This photo shows a side by side comparison of the new rotor and the old rotor running the same 30% water sample. Clearly the new rotor does a much more thorough job. I imagine that the mixing action we saw in the previous photos happens on the old open bowl, but rather than being near the wall it happens on the leading edge of the oil while passing though the cleanest oil. The feed cone is a must.

Numeric Control, LLC
PO Box 916
Morton, WA 98356